Pulse width modulated input to analogue 0-10Vdc output
A timed contact or solid state closure from the signal is optically isolated and can accept either controlling microprocessor controller is converted positive or negative polarity to a linear analog output with 255 steps of resolution.

The last output signal is held until the PWM 010 receives the end of the next pulsed input signal.

The PWM 010 will not wrap around if an excessively long pulse is received.

Four input pulse rates are jumper selectable.

The input signal is optically isolated and can accept either positive or negative polarity.

The PWM 010 includes triac adapter circuitry ( jumper selectable) for a triac input.

Four input pulse rates are jumper selectable.

The PWM 010 has a jumper selectable manual override which will allow modulation of the output between 0-10 VDC to verify proper operation of the controlled device.